When it comes to electrical safety there’s good news and bad news. The good news is that according to the Electrical Safety Foundation International (ESFI), annual fatal electrical injuries have declined by more than 50% since 1992. The bad news is that construction trade workers experienced the most electrical fatalities, closely followed by installation, maintenance and repair occupations.
Federal regulation of NFPA 70E and OSHA has helped reduce the number of electrical fatalities. But is your organization doing enough to protect your workers?
When we talk to customers about electrical safety, they usually fall into one of these categories:
When we refer to an electrical safety plan, we’re looking to reduce the most common electrical injuries: electrocution, electric shock, burns and falls as a result of electrical energy.
Here's what you need to know about achieving complete electrical safety. HINT: It's not just about complying with code, but making safety part of your culture.
Any comprehensive electrical safety plan should include arc flash safety. Just because you haven’t personally experienced an arc flash, doesn’t mean they don’t happen.
What is an arc flash event?
According to Arcadvisor.com, an arc flash happens when electric current flows through an air gap between conductors. Accidents caused by touching a test probe to the wrong surface or a slipped tool are the most common cause of an arcing fault.
The most common cause of arc flash is human error according to?Safety + Health?magazine.
The employee is often distracted while performing energized work or fails to use an insulated tool. Other factors include dropping conductive items in the enclosure like panel screws, the accumulation of conductive dust inside or equipment failure.
An arc flash event can be devastating to the worker, other personnel in the area and the company. An arc flash can reach temperatures of 35,000 degrees Fahrenheit or four times that of the sun. This often results in skin burns, eyesight damage, hearing loss, shrapnel wounds, shock hazard and death. On top of that an arc flash event can cost an organization up to $8-$10 million per accident.
Do you Speak Code?
Even with the latest revision of NFPA 70E for 2015, the code is still rather ambiguous when it comes to electrical safety and arc flash prevention. NFPA 70E stresses the importance of de-energizing a circuit before starting your work. There are several checklists online to see if your organization’s safety plan is addressing the right concerns. Here are a few examples from the ESFI:
This certainly isn’t an exhaustive checklist, but it’s a good start. If organizations really want to put safety first, they need to think about building a proactive safety strategy.
Creating a Proactive Safety Strategy
While a reactive approach occurs after the injury has taken place, a proactive approach aims to plan before an accident and to reduce the likelihood or extent of injury. A proactive approach requires additional time and planning, but overall the approach should be less expensive, should have buy-in from all levels of the organization and should result in fewer accidents and injuries.
Crafting a proactive safety strategy is similar to developing a strong business strategy. Before you can achieve success you need to define it and create a roadmap. Consider answering these key questions
How do we measure activities so we know we’ve achieved success?
A proactive safety plan goes way beyond arc flash labels and clothing. It’s about hazard reduction. And when regulations change you need to re-evaluate your policies and procedures to make sure you’re still in compliance.
One advantage to being proactive is that you should always be in compliance, which should reduce the potential costs of non-compliance.
Proactive electrical safety requires more front-end development, planning and assessment, but the long-term benefits outweigh the short-term costs:
It’s a lot of work, but if you have a well-defined plan and safety strategy—there will be fewer surprises. Organizations with a safety strategy in place usually have these key attributes:
Similar to training, a regular reminder helps keep electrical training top of mind
When you’re redefining your safety strategy this year, remember to involve all levels of the organization. Remember that safety procedures are not only about protecting your workers, but defending your company’s bottom-line. With arc flash events costing upwards of $8-$10 million per accident there isn’t a c-suite in America that can ignore the importance of electrical safety.